32 Comments

  1. J. Craft
    April 12, 2019 @ 1:04 am

    Tried any other 3D prints since this video, Alber Kim?

    Reply

  2. Cell Quad
    April 12, 2019 @ 1:04 am

    hi albert..good job 🙂 i wish theres a frame like that for 1s brsuhless micro quad BAT100..

    Reply

  3. We'rewolves FPV
    April 12, 2019 @ 1:04 am

    Hey Albert! Had messaged you but was not sure if you had received. Nonetheless hope you are well and enjoying life 🙂 I enjoy flying micro FPV and have been working on a 3D printable drone. You can see test flights and such on my channel. If you are interested in doing another frame swap, take a look at: https://www.thingiverse.com/thing:2956351
    You can use any of your spare parts in the construction. Nice job on that print in the video, it came out really nice!

    Reply

  4. edstar83
    April 12, 2019 @ 1:04 am

    3D printed parts are a lot stronger than people think. I love my 3D printers.

    Reply

  5. Riccardo Lardi
    April 12, 2019 @ 1:04 am

    Hi Albert, I can't get the FS-RX2A Flysky IBUS Receiver to bind to the Taranis QX7 transmitter I have, are these compatible at all? The green light on the receiver never gets steady…

    Reply

  6. Riccardo Lardi
    April 12, 2019 @ 1:04 am

    Hi there, I was interested in building this but found that the suggested flight controller and ESC are not available anymore on the market… are there follow-up products that fit this design or which alternative products can you recommend?

    Reply

  7. Frank Barajas
    April 12, 2019 @ 1:04 am

    Wow, really impressed with this re-build. Nicely done and looked really fun to fly.

    Reply

  8. Pascal Mulder
    April 12, 2019 @ 1:04 am

    Would you like to try my design? It is designed around Lizard95 components and the Micro Swift. https://www.thingiverse.com/thing:2507950

    Reply

  9. ApexGaming
    April 12, 2019 @ 1:04 am

    There's multiple versions of this frame on the makers website, could you try one with the lizard

    Reply

  10. ApexGaming
    April 12, 2019 @ 1:04 am

    Can you do a frame swap for the lizard ?

    Reply

  11. Kwad Creature
    April 12, 2019 @ 1:04 am

    I printed this frame awhile ago motors didnt sit right

    Reply

  12. Mad Yet
    April 12, 2019 @ 1:04 am

    i have the neato pipsqueak, love it, my only issue with the entire build was installing the props, i couldnt for the life of me get the props to light up with the holes on the motor. im using the rotorx 1105 motors with rotorx 2.5 props and i cannot stand the need for those bolts to hold on the props. hate it,

    Reply

  13. nueschtsNutzername
    April 12, 2019 @ 1:04 am

    really fast!!

    Reply

  14. Allstar Frames
    April 12, 2019 @ 1:04 am

    Sorry i havent watch on any of your new video too busy working. But U said 16×16 size flight controller what fc can u recomend on that size? Thanks

    Reply

  15. Mad Scientist Matt RC
    April 12, 2019 @ 1:04 am

    I am surprised by the durability! I have some 1103 10000kv motors sitting around, maybe i will print something up for fun in the backyard! Nice man!

    Reply

  16. Lefty FPV
    April 12, 2019 @ 1:04 am

    hmm i have the 1103s 8k with 2535 and 65mm two blades dry weight 51 grams and I think yours is faster with 2 inch. How can that be, I wonder.

    Reply

  17. GoneHiking
    April 12, 2019 @ 1:04 am

    That's quite impressive, and durable! I'm getting ready to swap out my babyhawk guts. Maybe this one when I break the Realacc KT100 frame.

    Reply

  18. Brandon B.
    April 12, 2019 @ 1:04 am

    are there any 1s builds you know of that are brushless?

    Reply

  19. L1L1TH1UM
    April 12, 2019 @ 1:04 am

    TINY KWAD!!!

    Reply

  20. Blue Ridge
    April 12, 2019 @ 1:04 am

    How would you compare the printed frame to the composite used in the QX90C? I've used the QX90C frame on my brushed quad a couple times and they're decent (and very light) but I was able to break them in a really good crash like quad vs tree at full stick.

    Reply

  21. paulie lie_fpv
    April 12, 2019 @ 1:04 am

    Nicely done Albert

    Reply

  22. Winston Smith
    April 12, 2019 @ 1:04 am

    PLA is actually slightly stronger than ABS, just more brittle. When you printed this, what layer height, shell thickness, bottom thickness, and fill density percent did you use. This is very important info for anyone wanting to print an equally durable frame.

    Reply

  23. Gianluca Gasparis
    April 12, 2019 @ 1:04 am

    that thing looks epic! i want it

    Reply

  24. Dod Rc
    April 12, 2019 @ 1:04 am

    Very nice 👌

    Reply

  25. TheTheGuinness
    April 12, 2019 @ 1:04 am

    Reply

  26. Aryan Gangurde
    April 12, 2019 @ 1:04 am

    soo… no melting issues as per the facebook comments suggested? hope not because that frame looks dope

    Reply

  27. Barca1010ch
    April 12, 2019 @ 1:04 am

    Which 3d printer did you use for your micro? Im interested because of the print bed size. As always, great video!

    Reply

  28. Wann Sklobi
    April 12, 2019 @ 1:04 am

    Love the frame! Selling them? Or selling other one??

    Reply

  29. Thibault Depaye
    April 12, 2019 @ 1:04 am

    which battery did you use?

    Reply

  30. rvol rvol
    April 12, 2019 @ 1:04 am

    Can you snap the walkera 110 frame I want to do it but don't really now how to do it good

    Reply

  31. Spinymonk FPV
    April 12, 2019 @ 1:04 am

    Nice build,great to see you flying with some gates ,great video Albert 👍

    Reply

  32. Roy Ninonuevo
    April 12, 2019 @ 1:04 am

    I like the design of that frame. It's pretty compact and the camera has pretty good protection. Looks like I need to put a 3D printer on wish list. Great job on the review.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *