50 Comments

  1. Tom Coss
    March 13, 2019 @ 5:03 pm

    I tried this machine and S9, S7 Edge. That wire damaged the touch layer. How to separate just the glass and not hurt the touch and lcd?

    Reply

  2. PlayerMick -
    March 13, 2019 @ 5:03 pm

    my only dilemma is i have to go through my decompression chamber before entering my clean room which is located in sector seven.

    Reply

  3. Wiggy B
    March 13, 2019 @ 5:03 pm

    Blow your nose man, your sniffling sucks LITERALLY

    Reply

  4. Magic Is life
    March 13, 2019 @ 5:03 pm

    can I have your number I own a phone store I used to work in Egypt as a screen refreshed I want to know if I can send my screens to get them fixed?

    Reply

  5. calastan
    March 13, 2019 @ 5:03 pm

    it's nice to see this, i fix phones tablets etc but i get the finished product so all i have to do is build everything from the old screen to the new

    Reply

  6. Allsmartrepair International
    March 13, 2019 @ 5:03 pm

    Hey I often have the problem that the Touchscreen when refurbished screen is installed does not work and has some small lines. What am I doing wrong when refurbishing?

    Reply

  7. NEVA Project
    March 13, 2019 @ 5:03 pm

    Do you know where i can get the mold like you have? (To take off the polarizer) Thanks for the video anw sir :D.

    Reply

  8. Dennis Linares
    March 13, 2019 @ 5:03 pm

    You can make a carreer out of this!

    Reply

  9. Dennis Linares
    March 13, 2019 @ 5:03 pm

    It's easier to disarm a bomb than to change the screen on an Iphone!

    Reply

  10. Nathan Stewart
    March 13, 2019 @ 5:03 pm

    This is the china of America.

    Reply

  11. GOSSAYE YILMA
    March 13, 2019 @ 5:03 pm

    if you have the machine that can bond the lcd flex cable pls make a video about the bonding proess and produt review about vertical puls bonding machine

    Reply

  12. diemante smith
    March 13, 2019 @ 5:03 pm

    i7 and i8 lamination moulds and glass are same

    Reply

  13. Cell Solutions Nasir Rana
    March 13, 2019 @ 5:03 pm

    Awesome

    Reply

  14. tc seacliff
    March 13, 2019 @ 5:03 pm

    broke my back glass on my 8+ ! let me get to my clean room and get to work!

    =

    Reply

  15. spartansamurai52 Yt
    March 13, 2019 @ 5:03 pm

    Can he just do it for me I will pay

    Reply

  16. Muhammad Saad
    March 13, 2019 @ 5:03 pm

    how do you know if your lcd is cracked or just the glass, and did you attend phone repair school?

    Reply

  17. Adrian train
    March 13, 2019 @ 5:03 pm

    Is there much difference between the equipment needed to work on iPhones and Samsung phones. Eg the curved Samsung screen opposed to the flat iPhone screen…… I'm just looking at getting started into Android and iPhone and tablet repair. In my local area, no one really touches Samsung screens that have the curved edge. So i see why there's only iPhone repairers……

    Reply

  18. Escorpio40
    March 13, 2019 @ 5:03 pm

    Sure, you talk like we all have equipment like that at home…Please

    Reply

  19. Jesstoni Verzosa
    March 13, 2019 @ 5:03 pm

    Did you put a polarizer in that lcd? Or in the glass its have a polarizer?

    Reply

  20. Joan Ash
    March 13, 2019 @ 5:03 pm

    What’s the temperature?

    Reply

  21. Focken Focker
    March 13, 2019 @ 5:03 pm

    WOW! Thanks very much for sharing this information and not leaving anything out! Your awesome fountain of info!!

    Reply

  22. Fix Freak
    March 13, 2019 @ 5:03 pm

    Great video…

    Reply

  23. lufti ruhimat
    March 13, 2019 @ 5:03 pm

    Dou you have original lcd iphone SE with digitalizer refurb? I need one, my iphone use oem lcd is poor quality . Please reply .

    Reply

  24. Rahul Nagargoje
    March 13, 2019 @ 5:03 pm

    Awesome work

    Reply

  25. المعتز بالله
    March 13, 2019 @ 5:03 pm

    ممتاز 😍

    Reply

  26. Junaid Tanoli
    March 13, 2019 @ 5:03 pm

    Very detailed and good video. Thanks.

    Reply

  27. AMGSC55
    March 13, 2019 @ 5:03 pm

    Hahaha until u buy all this machines u can buy a LCD screen from begining

    Reply

  28. Left Blank
    March 13, 2019 @ 5:03 pm

    The only thing to improve this repair is to use a different mould for the polariser removal machine and another mould for the laminator, so you can keep the cable down, problem is no one sells them on ebay, so you have to use alixpress but that takes 3 weeks +

    Reply

  29. Hosko Hishgee
    March 13, 2019 @ 5:03 pm

    Nice video. Thank you. Actually, I am planning to buy this type of machines. And interested on all in one types machine which is installed with compressor and vacuum pump. Usually those all in type of machines divided by 2 types. One is have press and bubble removing chamber, the other have only one chamber which can do lamination with bubble-free. So, which one is better for refurbish?

    Reply

  30. davinder billa
    March 13, 2019 @ 5:03 pm

    very good sir i started will be same work

    Reply

  31. wildcat 000
    March 13, 2019 @ 5:03 pm

    good man this porfact

    Reply

  32. Md: Arman
    March 13, 2019 @ 5:03 pm

    Nice sir🖒

    Reply

  33. Fábio Rabello
    March 13, 2019 @ 5:03 pm

    Which is better wire cutting Line thickness for that? 0.06mm, 0.08mm, 0.10mm? Does it matter?

    Removing glass, is it 0.06mm better to avoid broken lcd than 0.10mm?

    And sorry if you have said about that in this video. To understand english I am better reading than listening. Thank you.

    Reply

  34. Matthew Bailey
    March 13, 2019 @ 5:03 pm

    Excuse me.

    All of this specialized equipment is going to cost 5x to 10x as much as the entire iPhone.

    Reply

  35. Matthew Bailey
    March 13, 2019 @ 5:03 pm

    All of this specialized equipment is going to cost as much as just paying for a new screen and glass.

    Reply

  36. XDeberXD
    March 13, 2019 @ 5:03 pm

    Hello an i work with you please. Im a college student living in California. pleaseee :33

    Reply

  37. djEpokalipsa
    March 13, 2019 @ 5:03 pm

    The best way is not to buy this trash. Btw good job.

    Reply

  38. Malik Chand
    March 13, 2019 @ 5:03 pm

    Perfect

    Reply

  39. Joe Pan
    March 13, 2019 @ 5:03 pm

    why are you doing the pad over display, in bubble remover? Regards

    Reply

  40. יעקב זוהר
    March 13, 2019 @ 5:03 pm

    very nice and very perfect video. good explatation and no shortcuts.

    Reply

  41. Zarrell
    March 13, 2019 @ 5:03 pm

    Fuuuck Apple, touting their sustainability policy is a f'ing joke when repairing your phone for minor damages is more expensive than buying a new one.

    Reply

  42. J P
    March 13, 2019 @ 5:03 pm

    I am not an iphone user and I wont try this as well. But something makes me to watch this to the end. lol

    Reply

  43. ضياء فريد
    March 13, 2019 @ 5:03 pm

    nice work.what's the machines name please

    Reply

  44. Albert Stratos
    March 13, 2019 @ 5:03 pm

    Hi Jay. As some of viewers stated that's a lot of money for all that equipment. However you did mention that it increases profits and I get  that. But what do you do in preparation of new iPhone models coming out? Do you need to keep buying new molds? Or do you think essentially the phones will all be similar when it comes to fixing them. I'd hate to buy all that then next you know, they become useless. Any thoughts?

    Reply

  45. David Bello
    March 13, 2019 @ 5:03 pm

    Hello, I have your same setup and had a question regarding vacuum pump. Can find tube connections anywhere. Any suggestions??

    Reply

  46. Giovanni Zito
    March 13, 2019 @ 5:03 pm

    Can you repair phones with a Edge Display like The S8, with your mashines, Too? It looks like you can repair only normal screens.

    Reply

  47. Salim Patel
    March 13, 2019 @ 5:03 pm

    Hi very good video you dont do samsung s8 s7 edge glass?

    Reply

  48. Ammar Ali
    March 13, 2019 @ 5:03 pm

    I bit this lcd you done isn’t workinf.
    You fucked the flex cable bro.

    Reply

  49. Justin Justin
    March 13, 2019 @ 5:03 pm

    This does me no good lol

    Reply

  50. basilon
    March 13, 2019 @ 5:03 pm

    Do you recommend 4 in 1 with a TBK 508? Doesn’t get bubbles with 4 in 1? Thank you.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *