22 Comments

  1. mnhm gadka
    December 7, 2018 @ 11:25 am

    thanks you very mach

    Reply

  2. ABS INC
    December 7, 2018 @ 11:25 am

    That's cool

    Reply

  3. Lotusrk123
    December 7, 2018 @ 11:25 am

    There are some great inventions; the first being a vacuum cleaner (I use Rainbow), the second being a table. As far as testing capacitors, use an ohm meter. If it is shorted out, replace. If not, go on to other possible sources for your problem. There is a brief time when capacitance is declining as it burns out, but that time is brief. An old-school analog ohm meter will swing briefly and slightly to a resistance reading as the cap is charged, only to return to infinity if the cap is good. I HATE digital meters as you can't read a "swing" in the reading.

    Reply

  4. Les Meszaros
    December 7, 2018 @ 11:25 am

    as a kid growing up l enjoyed watching superheros but never really had one, but now that lm an adult l think l have found my hero in life……Mate, you are amazing…..thank you so so much

    Reply

  5. zac cobain
    December 7, 2018 @ 11:25 am

    I learned Alot. Don't be sorry about the turntable bro!

    Reply

  6. the ROAR Productions
    December 7, 2018 @ 11:25 am

    nice video but u didnt explained about that "on off" switch(six/eight pin) what its called?

    Reply

  7. Tom Wold
    December 7, 2018 @ 11:25 am

    You have nothing to apologise about. You fixed it. That's the MAIN thing.

    Reply

  8. johny alvaro
    December 7, 2018 @ 11:25 am

    salamat sa iyong paalala things

    Reply

  9. Tom Wold
    December 7, 2018 @ 11:25 am

    With a zener diode, once the zener voltage is reached it will allow current flow in both directions. Zener diodes are the only diodes that will allow current flow in both directions.

    Reply

  10. Georg Abenthung
    December 7, 2018 @ 11:25 am

    Great video! This really helps a lot. Thanks for sharing!

    Reply

  11. Wahaj Syed
    December 7, 2018 @ 11:25 am

    YOU ARE THE BEST!! I wish you were my professor

    Reply

  12. James Borgen Hansen
    December 7, 2018 @ 11:25 am

    Good video 🙂 .. I know nothing about electronics, so always good to learn something new 🙂 thanks 🙂

    There is one thing that confuses me, is it not normal that there is a fuse in such a machine ??

    Reply

  13. Dilip Baidya
    December 7, 2018 @ 11:25 am

    really appreciate your work Ive learnt a lot from your channel , it would be really great if you make a video on a homemade 200 watt inverter,. 🙂

    Reply

  14. James Koralewski
    December 7, 2018 @ 11:25 am

    The resistor color code is:"Bad Boys Rape Our Young Girls But Violet Gives Willingly – Get Some Now". The first letter of each word represents a color for the first two color bands on the resistor: Black=0, Brown=1, Red =2, Orange=3, Yellow =4, Green =5, Blue =6, Violet =7, Gray =8, White =9. The third color on the resistor color band represents the multiplier which is 10 multiplied to what power. The last three colors which represent the forth color band on the resistor, and may or not be present, are the percents of tolerances of the resistor. Get=Gold (5%), Some=Silver (10%) Now=no color (20%) The first two colors are numbers, and the third color is the multiplier. The forth color is the percent of tolerance which is sometimes not listed , but if it is,, it will either be 5%, 10%, or 20% depending on the color of the forth color band. So for example if the color bands are green, brown, orange, and gold, the resistor is a 51 times ten to the third power, which is a 51,000(k) ohm resistor with 20 percent tolerance. See link to better explain the resistor color code. https://www.google.com/imgres?imgurl=http://www.resistorguide.com/pictures/resistor_color_codes_chart.png&imgrefurl=http://www.resistorguide.com/resistor-color-code/&h=609&w=600&tbnid=tdS8OKaKcyTdQM:&tbnh=160&tbnw=157&usg=__aZCN1tMMiztUq7FKzTFnxNbUxUk%3D&vet=12ahUKEwiyl6a4lZfbAhUO61MKHUqDDswQ9QEwAHoECAEQLg..i&docid=e8rCe-kEsiDjlM&sa=X&ved=2ahUKEwiyl6a4lZfbAhUO61MKHUqDDswQ9QEwAHoECAEQLg

    Reply

  15. olawore daniel
    December 7, 2018 @ 11:25 am

    thanks man uv really increase my knowledge in electronics

    Reply

  16. Tony thinom
    December 7, 2018 @ 11:25 am

    Great explanation thank you again.

    Reply

  17. Rob Hernandez
    December 7, 2018 @ 11:25 am

    I am also in the process of learning how to read a schematic. It is kinda hard but little by little I will get it.

    Reply

  18. Rob Hernandez
    December 7, 2018 @ 11:25 am

    Excellent tutorial big tumbs up HOW TO BE AWESOME. You are awesome!!

    Reply

  19. Rob Hernandez
    December 7, 2018 @ 11:25 am

    on a resistor does it mater where you set the leads of the DMM? can someone tell me?Thank You

    Reply

  20. Rob Hernandez
    December 7, 2018 @ 11:25 am

    I have a Hitachi sr 303 that I am troubleshooting and have not been able to find the problem.The problem is no sound coming out of the speakers I have checked the IC for the amp and I am getting sound when I touch a couple of the pins.I have cleaned the controls with deoxit but I will do it again and hopefully that is where the problem is. Does anyone have any ideas as to what else I should check?Thank you

    Reply

  21. Rob Hernandez
    December 7, 2018 @ 11:25 am

    the capacitors are cheap the expensive part is the shipping!

    Reply

  22. Horacio Federico Botaya
    December 7, 2018 @ 11:25 am

    I perfectly understand where u got it from. It was just a mention. Tks for the great info!

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *