48 Comments

  1. junk mailss
    June 9, 2019 @ 8:20 pm

    Vary Good Video
    You Show All Of The Details

    Reply

  2. nuncasinrespeto
    June 9, 2019 @ 8:20 pm

    Great video. Most Valuable Part for me was the re-connection of the flex numbered 3 when re-bluiding. Fantastic!!!

    Reply

  3. Umedbhai Patel
    June 9, 2019 @ 8:20 pm

    good lession with vedio

    Reply

  4. birdandthe
    June 9, 2019 @ 8:20 pm

    connectors 6 and 7 are the killers.

    Reply

  5. Steven Dalton
    June 9, 2019 @ 8:20 pm

    Anyone have any idea what the little bracket that fell of at 10:15 is for, or where it goes?  It fell out from somewhere around the dock connector on mine too, but I'd like to put it back where it goes.

    Reply

  6. Lazuli
    June 9, 2019 @ 8:20 pm

    Awesome!!! Thank you! 

    Reply

  7. Oliver Krause
    June 9, 2019 @ 8:20 pm

    THANK YOU SOOOOOOOOOOOOO MUCH

    Reply

  8. slg
    June 9, 2019 @ 8:20 pm

    Thanks for this…just managed to change the back cover on an iphone 3gs…not something i'd ever want to go through again though!!

    Reply

  9. Dayan Georgesz
    June 9, 2019 @ 8:20 pm

    Thank you!!! I changed battery and back cover watching your video!

    Reply

  10. Miss Trill
    June 9, 2019 @ 8:20 pm

    Hi, just wanted to say thanks for this video. I had a faulty battery and the back housing had a massive crack. Because of the age of the phone, it wasn't worth paying to repair it. I only use it as an iPod now. I managed to strip and rebuild and install new battery/back housing and it's all working perfectly. Thank you A+

    Reply

  11. GeorgeHamberhill
    June 9, 2019 @ 8:20 pm

    Thank you so much for posting this repair guide.

    Reply

  12. Timothy Leach
    June 9, 2019 @ 8:20 pm

    Fantastic video! I managed to bend the pins on my phone and was about to throw it away before I decided to have a go at repairing it. Thanks to this video, and the spare part I ordered from you, I was able to replace the docking module with relative confidence and avoid having to buy a new phone. Many thanks!

    Reply

  13. sam. 64evo
    June 9, 2019 @ 8:20 pm

    Thanks great video going use this to fix 3g iphone

    Reply

  14. sam. 64evo
    June 9, 2019 @ 8:20 pm

    Thanks great video going use this to fix 3g iphone

    Reply

  15. Kale Graham
    June 9, 2019 @ 8:20 pm

    thank you very much

    Reply

  16. First Spear
    June 9, 2019 @ 8:20 pm

    Excellent video. What, though, if the cracking is so severe that there is no area sufficiently crack-free for placement of the sucker so that the vacuum is consistently defeated (air entering via the cracks) before the screens lift away?

    Reply

  17. Hector F Maldonado
    June 9, 2019 @ 8:20 pm

    Dear sir. Thank you for such great video, very detailed and described, leaving very little, if nothing for guessing. Useful and down right to the point, and very enjoyable to follow. I wonder if you've ever made one dedicated to the Ipod Touch G3 which is giving us customers a lot of problems, with the WIFI, due to software upgrade or ultimately a loose connector inside. So far, your videos are the best IMHO. Thank you much in advance.

    Reply

  18. Carlos Alberto García Chandler
    June 9, 2019 @ 8:20 pm

    Thank you

    Reply

  19. bigcactus33
    June 9, 2019 @ 8:20 pm

    Very pro thank you very much

    Reply

  20. Dogatman
    June 9, 2019 @ 8:20 pm

    Seriously i hope that guy, that designed mute and volume rocker screws position should burn in acid for this. (Jk, but srsly, extreme hard)

    Reply

  21. Sandeep Khemka
    June 9, 2019 @ 8:20 pm

    thanks a lot bro…..
    thank you very much much,,

    Reply

  22. MrGicafugica
    June 9, 2019 @ 8:20 pm

    thanks!

    Reply

  23. York Red
    June 9, 2019 @ 8:20 pm

    Hi, great video.Used it to replace the loom to the power button/headphone jack/mute button/volume buttons as power button wasn't working. Put everything back together ok but the power button still does not work. Only the power button was defective before and its the same after fitting a new loom. Suggests it wasn't the loom at all. Is there anything else I can change? Thanks.

    Reply

  24. Tahir Gurashi
    June 9, 2019 @ 8:20 pm

    Many thanks.

    Reply

  25. Kellie Macafee
    June 9, 2019 @ 8:20 pm

    i want to thank this video and you tube for allow programs like this. if this was not available i would have been one sad person in this world following these step it allow me to fix my iphone3g. my phone fell and drop on my ceramic floor and i was not able to hear the other person on the phone but they could hear me .so i try to use my headphone and it work for a few days but then my screen and went black and i couldn't see but this program show me how to reconnect the components that had detached when the glass screen popped out from the fall. now i am happier than a kid in the candy store.

    Reply

  26. PJ Sev
    June 9, 2019 @ 8:20 pm

    This is such a great tutorial.  Super good video, and explanations.  Thanks! 

    Reply

  27. Michael Samaras
    June 9, 2019 @ 8:20 pm

    Whoever designed that mute switch and volume rocker construction deserves a special place in hell.

    Reply

  28. Lars van Driel
    June 9, 2019 @ 8:20 pm

    thanks now i have fixed my old iphone

    Reply

  29. Edgar S
    June 9, 2019 @ 8:20 pm

    very good video,,,thnks

    Reply

  30. TheHanArts
    June 9, 2019 @ 8:20 pm

    Thanks alot! I've saved alot of money thanks to your video 😀

    Reply

  31. Ryan Bunting
    June 9, 2019 @ 8:20 pm

    cheers this really helped dude

    Reply

  32. Angelo Paolo Di Dedda
    June 9, 2019 @ 8:20 pm

    Thank you sir, the video was very useful.

    Reply

  33. TeamTech
    June 9, 2019 @ 8:20 pm

    Take apart the iPhone 5s

    Reply

  34. Thomas Bryan
    June 9, 2019 @ 8:20 pm

    Great! Answered many questions I had.

    Reply

  35. Emil
    June 9, 2019 @ 8:20 pm

    Thank you! 🙂 try to be more descriptive next time.

    Reply

  36. lasvagas16
    June 9, 2019 @ 8:20 pm

    To replace the volume button. Would I need to go as far as13.45

    Reply

  37. Ajay Nayar Karat
    June 9, 2019 @ 8:20 pm

    gr8 video , helped me to replace the power button assembly, thank u so much

    Reply

  38. JF Pulse
    June 9, 2019 @ 8:20 pm

    My phone was run over by the wagon at work looking at it you would think it was OK but it won't turn on and behind the screen looks like a schorch mark any idea what it could be

    Reply

  39. Bhaskar balivada
    June 9, 2019 @ 8:20 pm

    Thank you

    Reply

  40. John Newman
    June 9, 2019 @ 8:20 pm

    Very informative and well explained – I think you have given me the confidence to have a go at replacing the back shell – thank you,

    Reply

  41. Tudor Mărginean
    June 9, 2019 @ 8:20 pm

    Thank you you're the best

    Reply

  42. Steve Maggers
    June 9, 2019 @ 8:20 pm

    Can the dock assembly be removed without having to remove the battery first?

    Reply

  43. Gabriel Reis
    June 9, 2019 @ 8:20 pm

    <3 Thanks so much mate

    Reply

  44. Coral P
    June 9, 2019 @ 8:20 pm

    Haha i always call the top button a home button too 😉

    Reply

  45. n406
    June 9, 2019 @ 8:20 pm

    thx dude, found out my board been burn. coz water leak inside.

    Reply

  46. Nick heseltine
    June 9, 2019 @ 8:20 pm

    very good informative video will help me replace the battery and digitizer tomorrow.

    Reply

  47. alexcnb
    June 9, 2019 @ 8:20 pm

    Hi, it says on your website that you're out of stock of the casings and back sets for iPhone 3gs. Are you likely to get more stock soon?

    Reply

  48. Kevin Kusman
    June 9, 2019 @ 8:20 pm

    amazing video and narration.
    I have performed the entire process and now am left with a device that powers on but the touch screen does not work. what should I be looking for?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *