28 Comments

  1. Tech is Easy.
    June 3, 2019 @ 7:17 pm

    I use 12v battery.it is ok.

    Reply

  2. Veldaren
    June 3, 2019 @ 7:17 pm

    He's using the Force!

    Reply

  3. Keith Reynolds
    June 3, 2019 @ 7:17 pm

    Wonder if breathing in relatively negative charged air for a length of time has any effect.

    Reply

  4. Jamie Chapman8526
    June 3, 2019 @ 7:17 pm

    Do you feel the shock when you touch something

    Reply

  5. Alfonso Leyson
    June 3, 2019 @ 7:17 pm

    If you connect the red wire to your body and black wire to the ground, you are positively charged. You produced positive ions.

    Reply

  6. HowTo :
    June 3, 2019 @ 7:17 pm

    radio shack went bankrupt 🙁

    Reply

  7. Haunu Manlun
    June 3, 2019 @ 7:17 pm

    Sir, i have an issue with my negative ion generator. I am not getting an electric arc between the ground wire and the long red wire. Whats the problem?

    I am using an AC generator, but its not one exactly like the one you used. Mine has an "electricity outlet" on it as well as a USB outlet. Also, mine does not have the two prongs that yours has that red and black wires form the ion generator plug into. Also, my negative ion generator looks exactly like yours, even has the same model number on it, but mine has a green ground wire coming out of it, in addition to the other three wires. Any advice would surely be appreciated.

    Reply

  8. Stuart Kirk
    June 3, 2019 @ 7:17 pm

    Late to reply but what would happen if you made 2 strapped one to each legs, would there be a spark generated between both hands if they touched 🤔🤔

    Reply

  9. TenOndra
    June 3, 2019 @ 7:17 pm

    How would one go about making this with a flyback transformer? Mine has built-in diodes and caps so it outputs around 15kV DC, that's almost the same as the neg. ion generator. But from my calculation the output current on the negative ion gen. Is about 0.25mA while the output current of a flyback would be like 3-5mA. I thought about adding a high impedance resistor to limit the current, but I think small resistors would break down under a voltage like that. Any Ideas?

    Reply

  10. koodude2313
    June 3, 2019 @ 7:17 pm

    You should really have a carbon contact for the skin connection, less chance of irritation if it comes off your skin during twisting or loosens…

    Reply

  11. Ricky Spanish
    June 3, 2019 @ 7:17 pm

    OHH THE PERSONAL SPACE I WILL ACHIEVE!

    Reply

  12. anime dubberskdt
    June 3, 2019 @ 7:17 pm

    Is this thing is dangerous please reply me back because I want to build this thing.

    Reply

  13. IronH3avenZ
    June 3, 2019 @ 7:17 pm

    Anyone knows if there's any danger on putting it on the neck or chest?
    Any dangers of using more than one to gather more energy?

    Reply

  14. Sim Tong
    June 3, 2019 @ 7:17 pm

    Hi. My son is built the newer version of your static generator (the 5v one) for a science fair project but we are confused about one thing. Does this device pull electrons from the users body and leave him with a positive charge or does it give him electrons and a negative charge? I think you said it gives electrons, but the user seems to be connected to the red wire and red is usually for positive. That is why we are confused.

    Reply

  15. hello brother
    June 3, 2019 @ 7:17 pm

    Can it shock a person

    Reply

  16. Mohammad Al-Mawla
    June 3, 2019 @ 7:17 pm

    hello Sr First of all I want to thank you about your ideas , I want to ask if it works against salty water

    Reply

  17. Lost Stratagem
    June 3, 2019 @ 7:17 pm

    Is the same with Yigal Mesika's Electric touch

    Reply

  18. Henry Swan
    June 3, 2019 @ 7:17 pm

    would this work with a taser? i've attempted similar experiments with a homebuilt DC taser i made but found it felt really bad, even though it was powered with a similarly powererful battery (the 18650)

    Reply

  19. Kevin Gibbs
    June 3, 2019 @ 7:17 pm

    God mode

    Reply

  20. Ozymandias King
    June 3, 2019 @ 7:17 pm

    why is it necessary to have the high voltage ground plate touching the surface you're standing on? Im pretty sure I understand why it's attached to your shoe (but please correct me if I'm wrong). Anyway, here's my best educated guess: The high voltage positive of the supply is solidly contacted to the wearers skin. Since your body is well insulated by the shoe from the surface your standing on, your body is able to hold a strong positive charge. otherwise as the high voltage positive of the supply pulls electrons from your body, electrons would be pulled from the floor to neutralize the difference in charge so your body is shorting the HV output of the supply. Since you're wearing the insulating rubber shoes , you're body gains a strong, sustainable positive charge and results in a small parasitic capacitance between your body and the HV ground. So it makes sense why you'd connect the HV ground plate to the bottom of your shoe since this will increase this capacitance due to the added surface area of the plate and its closer proximity to your body. But why is it important that the floor touch HV ground? I know you're right and I'm sure it's probably a very simple reason for this but I'm missing it.

    anyway sorry, RECAP:
    -SHOES KEEP BODY FROM LOSING CHARGE THRU THE FLOOR
    -YOUR BODY IS THE POSITIVE 'PLATE' OF A CAPACITOR WITH THE GROUND PLATE UNDER YOUR SHOE INCREASING THE AMOUNT OF CHARGE STORED PER VOLTAGE, AND THUS, PRODUCING A STRONGER ELECTRIC FIELD AROUND YOUR BODY.

    now if any of that is wrong please let me know and also help explain the purpose of the standing surface and HV ground contact.

    Reply

  21. Ozymandias King
    June 3, 2019 @ 7:17 pm

    why is it necessary to have the high voltage ground plate touching the surface you're standing on? Im pretty sure I understand why it's attached to your shoe (but please correct me if I'm wrong). Anyway, here's my best educated guess: The high voltage positive of the supply is solidly contacted to the wearers skin. Since your body is well insulated by the shoe from the surface your standing on, your body is able to hold a strong positive charge. otherwise as the high voltage positive of the supply pulls electrons from your body, electrons would be pulled from the floor to neutralize the difference in charge so your body is shorting the HV output of the supply. Since you're wearing the insulating rubber shoes , you're body gains a strong, sustainable positive charge and results in a small parasitic capacitance between your body and the HV ground. So it makes sense why you'd connect the HV ground plate to the bottom of your shoe since this will increase this capacitance due to the added surface area of the plate and its closer proximity to your body. But why is it important that the floor touch HV ground? I know you're right and I'm sure it's probably a very simple reason for this but I'm missing it.

    anyway sorry, RECAP:
    -SHOES KEEP BODY FROM LOSING CHARGE THRU THE FLOOR
    -YOUR BODY IS THE POSITIVE 'PLATE' OF A CAPACITOR WITH THE GROUND PLATE UNDER YOUR SHOE INCREASING THE AMOUNT OF CHARGE STORED PER VOLTAGE, AND THUS, PRODUCING A STRONGER ELECTRIC FIELD AROUND YOUR BODY.

    now if any of that is wrong please let me know and also help explain the purpose of the standing surface and HV ground contact.

    Reply

  22. Jim Johnson
    June 3, 2019 @ 7:17 pm

    Hey how is it going i was wondering if you could give better discription of ion generator since i see several negitive ion generators on ebay thanks jim

    Reply

  23. Thee Smashboy
    June 3, 2019 @ 7:17 pm

    I did this then I died

    Reply

  24. Kyle
    June 3, 2019 @ 7:17 pm

    this will be useful for when fbi raid my loliporn collection

    Reply

  25. Anon ymous
    June 3, 2019 @ 7:17 pm

    Wow, I love this video so much, tbh im going to be contacting you back again, I'm a film student and I want to use this concept for a script idea I have, thank you so much

    Reply

  26. Nellu Hai xD
    June 3, 2019 @ 7:17 pm

    I must have a answer while I am not using or touching anything does the volt battery run out I mean like if I don’t touch anything?

    Reply

  27. the greatsay10
    June 3, 2019 @ 7:17 pm

    I'm gonna make one and touch people with it, NO one is safe!

    Reply

  28. -Zman-
    June 3, 2019 @ 7:17 pm

    His soldering iron is awesome

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *